Through Bolt BA Plus
Higher load values, faster processing, better performance
The new generation with improved propertiesHigher load values, faster processing, better performance: EJOT has developed the so-called BA series in the field of metal anchors. The product engineers have developed a completelynew designfor the EJOT Through Bolts, and as a result the performance datahas been optimisedfor the requirements of the project business:
- The sizes M8 and M10 can be anchored in reduced concrete panel thicknesses. In detail: The M8 can be anchored in 80 instead of 100 millimeters, the M10 can be anchored in 100 instead of 120 millimeters thick plates.
- The sizes M10 and M12 feature a second installation depth, each reduced by 20 millimeters. This allowsmore flexibilityfor different add-on part thicknesses.
- Seismic performance values C2 in diameters M10 - M16.
- Acoloured setting depth markingensures increased installation safety. It marks the larger installation depth or the smaller clamping thickness respectively.
- Head stamp:
A letter identifier defines the respective anchor length. After the installation itcan be reconstructed, which length was used and which installation depth is applicable for the clamping thickness.
- Bolt stamp:
In addition to the manufacturer's identification, it shows the diameter as well as the maximum and minimum clamping thickness.
- Faster installation:
The tightening torque is achieved by 30-50% fewer turns, which is particularly noticeable in series assembly.
Through Bolts aretorque controlled expansionanchors. By applying the torque, the bolt expands in solid substrates such in concrete. The result is a frictional connection, where the forces are transferred via friction into the substrate. The EJOT Through Bolts are optimally suited formedium-heavy loads.